This is an ad.
No, AIHorde still uses corporate models. The only open source part is distributing the computation.
No, AIHorde still uses corporate models. The only open source part is distributing the computation.
Uhhhhhh
No? If they are hard, they are dried out. Chewy, sure, that's the fun; but they should be soft to the touch.
Are we talking permanent background tracking? Or sending a message "hey, I'm here"?
Naja OK, sie ist Netzwerktechnikerin. Auf Feuerwänden o.Ä. hat sie sehr viel mehr Erfahrung und Durchhaltevermögen. Aber bei Linux reicht es, dass in keiner Desktopumgebung die Netzwerkinfos beim Maus-Hovern über dem Netzwerksymbol nach ihrem Geschmack formatiert ist...
Hm, habe leider beide nie gespielt. Schon auf protondb.com geschaut, ob die Empfehlungen da helfen? Beide Spiele sind zumindest als Gold angegeben
Tut mir Leid zu hören, welche denn?
Sehr basiert. Pinguin sei mit dir!
Ich kann meine Partnerin leider nicht überzeugen. Sie ist Informatikerin, braucht keinerlei properitäre Weichware, aber lässt sich von den kleinsten Kleinigkeiten abbringen
Just in case this post is real: the world does NOT hate you. Not you, not your people, not your country.
We wish you could achieve the freedom to experience the entire world.
For manga, I've found Mihon to be nicest, by far, and it supports the API. For books, I am currently "stuck" on koreader on Android (which "only" supports OPDS-PS). I do most of my reading on a reMarkable currently, and that has no supporting client. Writing one is on my to-do list, but it's a bit daunting of a task....
I think I have set Suwayomi to download / convert to CZB, not for Kavita specifically, but because a lot of reader apps cannot handle loose images
Haven't had any issues in that regard, so can't really say, sorry. I have two folders (Mangas and ebooks) on my NAS, and in Kavita, created a library for each.
You absolutely can edit metadata, although I personally haven't had the need yet. I use readarr and suwayomi for "obtaining" books and manga, respectively, and what they come up with is usually just fine.
I went through essentially the same thing a couple months ago. Tried Calibre (and Calibre server) since everyone recommended it.
Really disliked it. Calibre is great for converting ebooks, but has shit management and webserving capabilities.
I ended up with Kavita and am super happy. On the web client, both management and actual reading are a pleasure. Any phone/tablet client supporting OPDS works perfectly to read/download your manga/books from the server.
And a select few clients go a step further, supporting Kavita's API, which allows for 2-way sync (effectively, syncing reading progress between all your devices).
Yeah but conduit is so stale, it might as well be discontinued
Sure! As long as it's nixpkgs.
I still find it hilarious that since dd-wrt and OpenWrt are just… Linux, you could install Super Mario Bros on there. I checked, nobody seems to have tried.
Oh, definitely, but there are varying degrees of difficulty, esp. with what kinds of packages / package management you have available :D
Ah, that make sense. Is Wireguard P2P?
Yes, in the sense that each node/device is a peer. But the way I'd suggest you configure it in your case is more akin to a client/server setup - your devices forward all traffic to the "server", but it never takes initiative to talk "back" to them, and they do not attempt to communicate with each other. Unless you have a separate usecase for that, of course.
You both are perfect for each other, so don’t screw it up!
❤️
Closing in on 8 years
I’m actually surprised nobody suggested simply using the Pi with OpenWrt as my own router. Though, that would make it hard to host Jellyfin.
A brief internet search shows that surprisingly, hosting Jellyfin on OpenWRT should work.... No idea how well though. Come to think of it, having OpenWRT on the pi might make it a lot easier to configure, with graphical settings available and so on.
Could you explain Wireguard vs. Tailscale in this scenario?
I've never used tailscale, I'm afraid. Normally I would say: just use whatever seems easier to set up on your device/network; however, note that tailscale needs a "coordinate server". No actual traffic ever goes through it, it just facilitates key exchanges and the like (from what I understand), but regardless, it's a server outside your control which is involved in some way. You can selfhost this server, but that is additional work, of course...
Thank you all so much for your help! This is likely the solution I will go with, combined with another one, so again thank you so much!
Glad I could help, after being so unhelpful yesterday :)
P.S. I don’t care if you wrap an ethernet cord around her finger, get going!
Eh... Marriage is not really common in either of our families. We agreed to go sign the papers if there ever is a tax reason, lol. Sorry if that's a bit unromantic :D Nice rings though ^^
How would I go about gaining access to a locked-down Linux device I own.
Five years ago, I bought a Supernote A5. It was (and mostly still is) a great device for reading and writing on an eInk display, and it runs plain old linux.
The deciding reason I went for this device instead of the competition is that I was "under the impression" that they were about to enable full SSH access to the device! Awesome!
"Why were you under that impression?", I hear the skeptics ask. Well, their spokesperson has stated that they would do so. Via mail, and on reddit, publicly, multiple times. I was still torn, so sent them a DM, asking if this was ineed factual. "Yes", they said, "the next quarterly update will enable SSH access!".
Great!
Well, it's been 5 years. They did not follow through. A couple updates were published, none contained the promised functionality, the spokesperson stopped answering questions about SSH. The last software update I received is from 2.5yrs ago. Mentions of the original Supernote A5 have largely been scrubbed from their website.
Let me b
Self-Hosted setup for remote music lessons?
Basically, the title. After years of inactivty, I'll be taking music (cello) lessons again, with my teacher of yesteryear, from whom I've moved half a country away.
She has suggested Zoom but is open to alternatives. I don't particularly like Zoom, plus I have a feeling better quality can be had through a custom solution - but I'm at a bit of a loss as to what exactly would be a good fit for this project.
Maybe Jitsi? Does someone here have experience with it and could tell me if it's possible to set something like a "target" audio quality?
For hardware, I basically have two options. Both are already in use, for different things, and have sufficient processing capabilities - albeit no GPU:
- host everything at home. Plus: lowest possible latency from me to the server. Not sure how much that is worth though.
- root server in the Hetzner cloud: much faster network speed. Again though, not sure how beneficial that is, the ultimate bottleneck will always be my upload speed (40Mbit)
OK,
Can't use Crunchyroll via WireGuard
Hi,
not sure where else to post this. For a while now, I've unsuccessfully been trying to get WireGuard to work with Crunchyroll.
Setup is as follows:
- dedicated server hosts a wg-quick instance in [neighboring country]
- OPNSense acts as peer on a single IP
- I have a rule for routing the entire traffic of some source device via that IP
This works just fine. Handshake successful, traffic is routed via the server. traceroute shows the server as the hop immediately after my device's local gateway. The connection is stable, and fast.
...except for Crunchyroll. The site / app itself is fine, but I can not, for the life of me, get a video to play. It just keeps loading forever.
I don't think this is an issue with CR recognizing that I'm not where I say I am - looking online, it seems pretty easy to use CR with a VPN. I've also tried from multiple other devices, all with the same symptom.
If anyone has suggestions, I'd love to hear them 😅
EDIT: ~~It was MTU. Had to manually