Skip Navigation
InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)UD
Posts
10
Comments
43
Joined
1 yr. ago
  • I've never visited the site before so I just assumed it was just malicious, but as @zdanger said, it might be a hijacked legit site.

    I do use uBlock. It also didn't 'feel' like an ad. I now expect the site was compromised as you suggested.

  • PC Master Race @lemmy.world
    UnH1ng3d @lemmy.world

    BEWARE Fake verification notices

    I just saw this and felt I should share it. I'm sure most people here wouldn't fall for it but it can't hurt to make sure 👍

    Edit: I just wanted to add, I have no idea what this tried to copy. I'm using Firefox on Linux which is perhaps why it didn't make it to my clipboard 🤷

  • You're probably right, I should maybe just buy a cheap one. I wondered if maybe some of them are known to use better components or have less coil whine but I don't think anyone has checked this yet 😅

  • Thanks for your answer.

    Please forgive me, but I strongly believe they are reference cards. I'm referring to the cards built by those different manufacturers, but still using the reference design - all having identical pcbs and coolers - the cards that all look the same, despite having a different brand on the box.

    I don't mean the cards that are designed by those manufacturers and look completely different.

  • Thanks for the great answer 👍😁

    Do you consider sapphire to be morally responsible compared to others? Also, I'm curious, is there a case of one being responsible for a drought that you're referring to?

  • PC Master Race @lemmy.world
    UnH1ng3d @lemmy.world

    AMD reference cards - Difference between brands?

    I'm looking at buying a used reference RX 6800.

    I notice there are quite a few brands for the reference model (ASUS, MSI, Sapphire, etc) and wondered if any of them use better components for example. I would quite like lower odds of having coil whine if it's related.

    Just to explain my choice of card:

    • Max 40mm thick
    • Supported by Ollama
    • No proprietary software when using linux
    Dentistry @lemmy.ml
    UnH1ng3d @lemmy.world

    Are the black bits on these two teeth cavities?

    If they are, is it possible that they can recover or is it too late?

  • I didn't know this was a thing, but I hope 3d printer reviewing people adopt it as a standard test. Most of the time a prints fails for me, it's because of a inconsistent (continuously changing) first layer.

  • 3DPrinting @lemmy.world
    UnH1ng3d @lemmy.world

    4 Axis 3D Printer - Non-planar - Custom slicer!

    KDE @lemmy.kde.social
    UnH1ng3d @lemmy.world

    Yellow icons in dolphin

    Can anyone tell me what these yellow exclamation marks mean?

    Linux @lemmy.ml
    UnH1ng3d @lemmy.world

    The Mozilla layoffs ... will get worse

    I just saw a post complaining about the Mozilla layoffs.

    I wanted to point out that the vast majority of their income (over 85% in 2022) is from having Google as the default search engine - Ironically, the anti monopoly lawsuit against Google will end this.

    Expect things to get worse.

    Please don't assume it was just a cruel choice.

    S1 S2

    Kdenlive @lemmy.ml
    UnH1ng3d @lemmy.world

    Disable resizing clip to fit inside the project's resolution?

    Currently, if I add a clip which is taller than the project resolution, kdenlive will scale it down so it's all visible and leave black bars at the side. Is there an option so any extra is just trimmed off instead?

    I'm sorry if this is something obvious and I haven't spotted it, I'm a complete novice 😅


    Edit: I think I've found what I need. The transform effect, and then "adjust to original size".

    This is all I need but please let me know if there is a way to make this the default for a project 😁

    3DPrinting @lemmy.world
    UnH1ng3d @lemmy.world

    Any ideas what causes this in overhangs?

    When I do an overhang test, I always have this problem at about 35°. Does anyone have a suggestion what could be causing it?

    • Slicer: Orca
    • Layer height: 0.2mm
    • Infill: 0% (this has improved it a lot, I think the infill was causing bulging)
    • Outer walls: 2
    • Overhang speed: 10 or 20mm/s (both look the same)

    Solution: I mistakenly thought overhang speed in Orca was based on overhang angle, it is percentage instead (which makes much more sense for different layer heights). My 10-25% overhang speed wasn't set to slow down and that must translate to about 35° at 0.2mm layer height. I now have it set to 30mm/s and it now looks great 👍 And sorry, I was wrong when I stated the overhang speed 😅

    Linux @lemmy.ml
    UnH1ng3d @lemmy.world

    Install Linux distros without grub??

    I use rEFInd as my boot manager and sometimes I like to dual boot a new linux distro (just to try out) which I install with a live USB. Unfortunately, after installing, GRUB has always taken the reigns and it becomes a slight inconvenience to get back to rEFInd every time.

    Is there some trick that can request grub not to install?

    [What prompted me to ask was I tried KaOS yesterday, and during installation it asked what bootloader i wanted and included the option for 'none'.]

    Mechanic Advice @lemmy.world
    UnH1ng3d @lemmy.world

    Gear selection problem

    Can anyone suggest what might be wrong? I have just changed the clutch and now I am struggling to select gears even when the engine isn't running.

    I don't think it's linkage related because it seems to be difficult to select gears just pulling directly on the arms that move the forks too. I don't think I've done anything that should have an effect on the inside of the gearbox, I've removed and refitted the drive shafts and changed the fluid.

    Also can anyone confirm my thinking that the clutch and concentric slave cylinder shouldn't be a factor, since the problem exists when the engine isn't running?

    Edit: Strangely, after leaving it overnight, gears are selecting perfectly again and I have absolutely no idea why. I didn't change anything 😕

    I suppose that should be good news but without knowing what the problem was, I'm not very satisfied. Thank you to everyone for your help.