hackaday.com Simulating Air Flow For 3D Printing
You’ve probably heard that a 3D printer is capable of producing its own replacement parts. Sometimes, that even includes upgraded or improved versions of the parts it was originally built wit…
Posts
11
Comments
67
Joined
2 yr. ago
They were running at $9.99 if I remember correctly. Just finished a 5 hr drive, the stopover at Cracker Barrel was a pitstop en route.
Found This (and more in post) at the Cracker Barrel (US Restaurant and Gift Store Chain)
All were obviously 3D printed. Layer lines were very clean. Even saw a kid walking around with one in hand hugging his parents to buy it for him.
He indeed is.
A baby Beagle. Mine was nothing but a food obsessed much machine.
I am curious as well. Is the project still active? I just found it the other day and would like to move from Sync for Lemmy and this is by far the best replacement I have found. It works great. Even does a fantastic job with my Google Pixel 9 Pro Fold.
I hope it is still in development and just wanted to know if anyone knew anything.
Saw this just the other day here...
Close Call
Printing a BD-1 droid from Star Wars; Fallen Order/Survivor at 300% (Printables). Noticed that the filament was running really low and needed to be choosey about what part I printed next. I feel I choose wisely.
It's the Torment Nexus dilemma.
Thanks for the clarification!
We do have Aldi's here in the US, unless Aldi Nord is something different than this division.
I don't see any thumbs on that hand!
It's been 4 hours since the post. I hope there is still leftovers. I'm on my way!
abberration arbor-ation
I suspect you called me out to do this by your choice of words. I appreciate it.
Abhorrent Arbor-ent thief.
Printing Height Limit
My Klipper-ized Sovol SV06+ is having an issue where it reaches about 4 inches on the Z axis and it goes bad. Some examples are below.
https://files.catbox.moe/jlajvg.jpg https://files.catbox.moe/5wk547.png https://files.catbox.moe/03u7vd.jpg https://files.catbox.moe/1np7lq.jpg https://files.catbox.moe/zdeeqv.jpg https://files.catbox.moe/x3fbjz.png https://files.catbox.moe/yx0mmd.jpg https://files.catbox.moe/3p4s6x.jpg https://files.catbox.moe/qwf0dm.jpg
Ghosts pass through solid wall/door. Celebrate finding a key. Unfortunately they cannot remove it from the room as it is solid and cannot pass through matter like they can. Ghosts get depressed about this.
You lift them from the bottom and there is a system of gears and springs (citation needed) that assist with them being raised and hold them in place.
Pull them down from the bottom and they come down (with some resistance).
Astroturfing on Lemmy? We must be getting big!
I would make a guess and say that if you are looking to get an answer or to do something with Assistant having your notifications read to you first and delaying whatever you wanted to do... might be an unwanted feature.
Now if we can just have a decent case that is...
- Not slippery
- Adds SOME drop protection
- Has Mag-Safe
- Has Mag-Safe positioned correctly
- Stays on without too much adhesive
- Looks halfway decent /allows the phone's design to be seen
I would be happy.
It just got delivered today!
Mine said the 16th.
Pixel 9 Fold Pro - Backordered on Day 1 with T-Mobile (US)
Woke up early today and the first thought through my head was ... Hey, the Pixel 9 Fold Pro is going to be available today. So I jumped on the site and found it... backordered until mid October.
Anyone else able to get one on T-Mo or another service or are they backordered from Google themselves?
A Coven of Harry Potter's...
A coven (according to Google, that is the correct grouping for wizards) of 15 Harry Potter figurines ready for my daughter's 7th birthday party to be colored in by her & her friends using some paint pens.
Kid Friendly Paints for PLA?
So my daughter is loving her new Ender 2 Pro and printing out Harry Potter figurines to paint. We have been using acrylic paint pens (easier at this age), they have been good, not great. We are having a Harry Potter themed b-day party for her and her friends. I am going to print out a batch of Harry, Ron, and Hermione characters for them all to paint after the play time limit at the trampoline park ends.
was wondering... What kid friendly paint works best for PLA?
Tie-Fighters Follow Up
I am pleased to follow up to this post with an update that the Tie-Fighters now all have engines and am halfway done with the solar collectors frames.
Printing a Wing of Tie-Fighters...
... for my daughter and the neighbor kids. All scaled to 200%.
printables.com/model/563813-t..
Going to throw on some fun colors for the canopies and solar collectors.
Overture Black Sovol White Overture Space Grey Overture Dual Color Silk Red/Gold
Constantly Adjusting Z Height Offset
Good day! I am running a Klipperized Sovol SV06+ and have been getting some really great prints. I am however having an issue where lately I am having to adjust the Z offset with each new print. I did a first layer calibration and got a perfect result but after a couple prints I saw I needed to lower it to get a good first layer. Again I printed a few and then again I needed to lower it. This has happened a few times.
Yesterday I was printing a pretty large print and midway through the extruder shifted (the print remained secure to the bed) and continued printing. After I canceled the print I had to lower the Z offset much further than I thought was possible. I am concerned that the bed keeps "lowering".
I have a very good bed mesh loaded (used the silicone bed leveling mid I have seen discussed). I am just unsure why this is needing to be adjusted and why the last print went wonky (related?)
Thanks much!