The EU also tariffs them heavily
Yes, to tip the scales back towards fair competition pricing by offsetting the subsidies the Chinese brands are getting from their government. It doesn't fully offset it though, they're still quite a lot cheaper than e.g. VW BEVs
All I think is "oh, that person is either a tattoo artist (and friends with a bunch of them too), or good friends with one". But thats just based off of my own experience, the people I know that are heavily inked are all tattoo artists or married to one.
so they are also good at risk management, as they're avoiding cannibals
Eh, I'd argue it's actually the exact opposite of good risk management. They've spent a lot of time and money mitigating something that's extremely unlikely to ever pose a problem. They should take a step back and reevaluate that risk matrix, maybe get a second opinion on it too.
Jeg ved ikke om protester faktisk gør det store indtryk på Trump, medmindre de støtter hans sag. Han har nogle virkelig store skyklapper på, han enten kan eller vil ikke se de problemer der er lige foran ham pga. de tiltag han har lavet.
Likely swerve and come to a hard full stop.
Jeg troede allerede det var ved at dø ud...det er da mindst et halvt år siden det lort kom frem her i DK, det er ikke andet end bondefangeri.
Then they must have use some impossibly shitty magnets to be able to drag the plate sideways like that. I can literally drag my printer across the table only by the plate if I try to pull it off lengthwise instead of upwards.
There should definitely be enough holding force to trigger the collision detection if it hits the print enough to move the plate like that.
It could definitely be the nozzle getting caught on something so the motors skipped a few steps, I've had that happen once before and it produces this exact outcome.
Det er helt fint at have brug for hjælp, men når man har de finansielle ressourcer hun har, så er det simpelhen at pisse på systemet at trække på det i det her tilfælde. Hun tager jo muligheden fra nogen der ikke selv kan betale for den type hjælp, bare fordi hun ikke gider betale selv. Det er for sindssygt at man kan få sig selv til at tage ressourcer som man på ingen måde har brug for.
Why the hell is there an apostrophe in approves!!?
If you have a great idea but no drawing skills, why not use AI to help you get that great idea out in to the worldin great visuals? Why is your idea less worth because you needed AI to draw it? Why would the same idea be worth more if you paid a human to draw it? The idea is exactly the same
Not everyone wants to do "art", so the assumption that AI shouldn't make that and leave it to humans is objectively wrong. Plenty of hobbies and things people love to do recreationally has no artistic value of purpose.
Use AI however you like, it can create value wherever you see fit. You don't like it for artistic outlet which is fine, I don't care and think this crap you made is equally meaningless.
Why not let people who are exceptional at creating ideas but terrible at putting them in to physical/visual representation use AI to aid them with skills they don't have?
Human made does not equal worthwhile. not everything is worth something just because a human made it.
Neither is worth while...the "effort" put in to this is so low it hardly registers, and soul it has none of. This is just as bad as AI slop, just in a different way.
WTF...what's up with that shitty reddit-esque bullshit silver thing.
Vildt nok du syntes Toms chokolade er kedeligt men ikke Marabou 😅 det er rimelig meget samme kvalitet (eller mangel på)
+1 jeg tager helt sikkert også hellere 10g god chokolade end 100g Marabou
It's OK...nothing stellar or impressive, but acceptable and absolutely good enough for most light users, the one-sided Z-axis is not ideal.
But yeah, the speed is completely shit compared to other modern bedslingers. edit: seems they managed to catch up to the cheaper competitors WRT speed, so they're on par with printers that cost less than half now.
Mit er inklusiv foreningsmøder ca. hver 14. dag...det er faktisk kun der jeg drikker alkohol.
Nej der formulerer jeg mig nok dumt/uklart, for det er inkl. alle de ting selvfølgelig (også 2x privatskole her). Jeg mente "inden vi er færdige med at betale for" så løber totalen også op omkring 25k.
Edit: OK jeg kan godt se at min uddybning faktisk også giver anledning til forvirring. Men ja totalt set koster vores børn også omkring de 25k i kvartalet.

Cautiously peeking from his favourite hide


Only been in there for a week, he's still shy but slowly becoming more brave. He explores mostly during dusk and dawn, during the day he doesn't move from this hollow cork branch but has gone from hiding at the back to peeking out the front mostly.

My new snek


Picked up this little guy the other day, a male hypo bloodred het charcoal corn snake.

The little bugger has been hiding since he moved in a few days ago.

Steam deck reservedele...HVOR!!?


Den ene bumper-knap i venstre board (den i toppen på billedet) er desværre knækket og den her ødelagt solder-padden i printet så kan ikke skifte selve knappen.
Har nogen haft held med at finde dele til steam deck? For ellers har jeg bare et stort stykke E-skrald fordi de ikke vil sælge reservedele og det pisser mig af...
EDIT: Valve har svaret på min henvendelse, de vil gerne reparere den for €140, men de vil ikke bare sende printet så jeg kan gøre det selv desværre 😒

New printer, considering the prusa CoreONE...but
I have a cheap bedslinger at the moment, it prints well enough and with decent speed, but it's a little finicky whenever I need to start a new print and I sometimes have to stop and restart 2-3 times in the beginning to get the first layer good. I'm also having some issues with ASA warping (especially on overhangs) it's enclosed and heated to ~45°C.
I was thinking of building a voron, but I don't really have the time to have a printer project, so I wanted something that's close to what Bambu labs deliver, but ideally with the accessibility of klipper+mainsail.
I thought of getting the Prusa core one, but seeing reviews of it has really put me off it.
The printing speed is slow AF...a 37min benchy on a coreXY in 2025, WTF!? My bedslinger does it in less than 30min. The ecosystem Prusa delivers seems half baked at best, with no LAN access to the full printer interface? I'm used to klipper+mainsail which is amazing and offers full local control of every aspect of the printer settings/

Bulk remove trackers (qBit) - how?
i want to remove specific trackers from all my torrents (they're discontinued), it's not doable with a per-torrent method as i would never finish.
I'm using qbittorrent v5.0.3 WebUI, i cannot just select the trackers i wish to remove under the "trackers" pane in the left side as it only allows me to remove all torrents with this tracker (i do not wish to remove the torrents), and not remove the tracker.
how can i remove these trackers from all my torrents easily, while keeping the torrents for seeding?

My treadmill is suddenly feeling weird
when I run on my treadmill, it has suddenly started feeling like it briefly stops the belt whenever I land my stride. I've tried greasing the board underneath the belt with silicone grease according to the manual, but that didn't help. Any advice on how to fix this? Could it be the belt that needs tightening?
[SOLUTION] It was just belt tension, it had become too slack. A quick tightening fixed the issue completely.

Serving my media library to my TV (local network only), i need suggestions
I currently have two TVs, one I use an appleTV with and the other with a googleTV HD (device formerly known as Chromecast), but they both have issues.
The jellyfin app on appleTV is messed up, it fucks up audio and subs all the time, and in general has a hard time with media that has multiple audio tracks, not using the audio I select with the remote.
The googleTV just stutters with almost everything, direct stream or transcoded doesn't matter. All of my library is just 1080p, I have proper wifi to it, all mobile devices stream just fine.
So neither of these provide me with a solution that really works.
What solutions can you recommend, that allows for seamless navigation of jellyfin with my remote? I don't want anything resembling a mouse/keyboard combo for navigation whatsoever.

What is you settings for PETG?
I've been having some serious issues getting PETG to print well, and I was wondering what settings other are using with success? I'm using a bedslinger in an enclosure and normally i print PLA with 200mm/s.
What are you doing for nozzle/bed temp, cooling fan, printing speeds etc? enclosed/open?
What is your printer capabilities normally for e.g. PLA?

Shitty first layer on "big" parts, need some help


I have a cheap bedslinger, an Anycubic Kobra 2, and generally it's a pretty decent printer at the price. I have flashed klipper FW on it, so I'm not using Anycubics FW.
I have issues whenever I try printing bigger parts, the first layer is always complete shit (see post photo).
Heightmap, measured with inductive probe

Slicer settings for line width

I don't know if my printer just doesn't correct Z-height during first layer, if my line width settings are completely messed up or what is causing this, but the