Search

Hi there, hope this is the right place for something like this.

So today I used my computer like normal, everything was fine this morning.
Then after a brief walk I came home and it won't turn on since.
When I click the power button there is the normal click sound of the psu and nothing happens.
My keyboard lights up, the ethernet port lights up, but other than that - nothing. Already tried to remove the ram, the graphics card (just removing the power cable of it turns on its red light), removing just the cpu power cable does turn on the motherboars red status light, but non of the fans or other status leds light up.

My build is not new and other than the keyboard I did not change anything lately.
The build consists of:
Asus ROG Strix B550 A
Ryzen 5600x
32 GB Ram (Crucial ballistix)
Asus RTX 3060ti
Corsair RM650 PSU

I also unplugged the psu for a while. It makes a slight buzzy noise after powering the computer, but I do not know if this is normal.

Can anybody hel

Hey, quick question that I'm too dumb to know the answer to and can't seem to find any info about anywhere.

I just got a 2.5" HDD and put it in the dedicated place in my Fractal Meshify C case. It's on the side, and there really isn't enough space for it - the drive is too thick for the panel to come back on normally. When I put the panel back on the case it pushes right up against the drive and the panel clearly isn't flush with the case.

Is this an issue? Or will the drive be fine?

Hey guys, I have Corsair RM550x that is turning on/off its fan in 65-70 min cycles when PC is on idle. When PSU fan is off I meassure 31W from wall and 21W when fan is off. Other PSUs are not like that and they are around 25W. Funny thing is that fan shouldnt even spin below 220W iirc and I found it hillarius that its using less power when fan is on. PC is working fine, but is this normal?

Edit: specs - MSI Z270-A PRO, intel G3930, 8gb ram, 2 sata SSD and no GPU

Edit 2:

Thank you all for helping me out!

I believe that no flow in case caused PSU overheating and due to lower efficiency at higher temp PSU was using more power. Enabling case fans with small positive pressure fixed the problem immediately and now its stable at 24W on idle. On the next diagram PC was idle for only short period of time, so you can also see power curve when it was running some services, but still "much" less than 30 W.

Edit 3:

G.Skill Ripjaws F5-6000J3040F16GX2-RS5W | G.Skill Ripjaws F5-6000J3038F16GX2-TZ5NR

I get that timings are different, but i'm curious about RS5W and TZ5NR. And if one of these is on the MBO compatibility list and the other is not would it work anyway?