Hello guys i have a qustion about which distro i should use?

I want to dual boot windows and linux

I just want a safe place away from microsoft eyes to do edit and drawing and other hobbies on my pc. And playing some games like cs2 & 2d games Also the distro run my wallpaper engine Should be popular distro so if i have a problem i can ask about it

Please dont tell me linux mint because i tried it 3 times and everytime i do anything simple the distro goes off and i should re install i won't give it anymore chances thank you 😖

Edit: thank you guys for typing your suggests. after some search i will give bazzite try and if won't work like i want. I will go with the other suggests I really enjoyed reading all your suggests

Compatible with PeerTube. Unfortunately there is no login support but you can search, watch and subscribe to videos in the same feed with youtube and whatever else.

Is this a decent OS to move users off Win too that I won't have to do a lot of remote maintenance on? I have a few varied OS's installed on machines around and Cinnamon I have found to look/feel a lot like Windows 7 which would benefit the learning curve for family/friends looking or needing to find an OS to install on a machine that isn't newer.

Curious if anyone has used this, and if so if it is a good fit for those 60+ aged family members and such. They have all used Windows for work at least a decent amount, so keeping things similar is always good. A decent App Store would be nice though. I hated the default store in Pop_OS.

If I could say do updates and reboot every once in awhile and you should be fine it'd be great. Remoting in with RustDesk and sudo Apt Update/Upgrade being all that is needed also would be great, but you know how that goes. Someone will break something, and I just want something intuitive enough that they won't do it often.

Hello,

I am using Fedora, but have a temperamental internet connection at home. Updating can be difficult because large downloads are slow and tend to reach timeouts most of the time.

Is there a way to have my system download one update from the list at a time instead of multiple?

This might at least help prevent me needing to retry upwards of 4-5 times hoping it all eventually succeeds within the timeout and failure limits it seems to have.

I did check online a bit and the manual for dnf, but web searching seems to bring up "updating a single package" not iterating through the available updates to baby my horrible internet. And the manual didn't seem to mention anything regarding this.

Hoping there is something.

Thank you very much for any suggestions or guidance.

Im currently trying to get my Keyboards software to work on linux, but since that won‘t be a thing, like ever, im trying to Reverse engineer the software in order to copy the get and set requests the Software sends over USB and send them over a Python Script using libUSB, so I can control it independent of OS

So I set up my Wireshark with a USB snooper and started using the software

Only problem: Since I have no idea how a Keyboard usually communicates, so I have no idea what to look for. Can someone recommend me some already reverse engeneered FOSS Keyboard software as an example? (Like the wooting software, if its even OSS)

So I have been contemplating virtualizing my day to day and running it on my host with the thought I could upload it to a cloud for various reasons. Thing is I would like to use a virtual machine but I want something that could be moved anywhere without any modification. So I sorta feel I would have to go with a container but again I sorta prefer a standar vm. Im just looking for peoples thoughts.

The X86_NATIVE_CPU Kconfig build time parameter has been merged for the Linux 6.16 merge window as an easy way to enforce the “-march=native” compiler behavior on AMD and Intel processors to optimize kernel builds for your system's local CPU architecture/family. For those who want “-march=native” for Linux kernel builds on AMD/Intel x86_64 processors, you can easily include a new CONFIG_X86_NATIVE_CPU parameter to set this compiler behavior in local kernel builds. The CONFIG_X86_NATIVE_CPU parameter is considered when compiling the Linux x86_64 kernel with GCC or LLVM Clang when using Clang 19 or later due to a compiler bug in the Linux kernel in older compiler versions. In addition to setting the compiler parameter “-march=native” for Linux kernel C code, enabling this new Kconfig build parameter also sets “-Ctarget-cpu=native” for Rust kernel code.

I would like to game with a touchscreen since I'm disabled and most games I wanna play don't have touch support or won't work in waydroid. For example I wanna play games from my childhood like the telltale games games

This is giving me warm vibes, so I'd love to find a theme that is like this. Does anyone know any? I'm using GNOME, but any DE that can pull this off is fine.

GNU Taler begins operating in Switzerland, distributed by the Taler Operations AG. Gnu Taler aims to be a “digital wallet” and has been used by the swiss national bank as well as the european national bank as a example for how a digital currency handed out by the state could work. It aims to be as privacy preserving as cash for the buyer while not allowing the seller to evade taxes.

Currently the Taler is brought out by a special organisation, the “Taler Operations AG”, and not the national bank, although both the national bank as well as the Taler Team have shown interest in a official digial currency by the national bank based on the Taler. But we need to relativate as the national council has stated that the introduction of a digital currency would probably take relatively major legislative changes and therefore take a bit of time.

Fedora 42 gnome, suspend does not work it wakes up immediately and stays in the login screen.

I have a pretty old laptop with an AMD dGPU and I am trying to do OpenCL compute on it to make sure that device switching is handled correctly in some stuff I am testing. All the instructions I see to install amdgpu drivers is to have --no-dkms as an install flag. Doing amdgpu-install --usecase=opencl --no-dkms --opencl=legacy results in ERROR: using '--no-dkms' with '--opencl=legacy' is not supported

Specs:

HP Pavilion 15-br158cl

CPU: i7-8550u (HD 620 iGPU and this has working compute)

GPU: Radeon 530 2 GB DDR3

RAM: 24 GB

OS: PopOS 22.04 6.12.10-76061203-generic

Clinfo -l output

    
Platform #0: Intel(R) OpenCL HD Graphics
 -- Device #0: Intel(R) UHD Graphics 620 [0x5917]
Platform #1: AMD Accelerated Parallel Processing

  

As you can see, only the platform, not a second device. Is there anything that I am missing?

I did post this on reddit in the PopOS subreddit. https://www.reddit.com/r/pop_os/comments/1kvza44/is_there_a_way_to_use_amdgpudkms_without_bricking

I was walking home yesterday and I just happened to come across an HP LaserJet p2035n sitting by the dumpster, waiting to be taken away. I've never owned a printer, but this thing looked like it came from an era when such devices were made to be reliable instead of forcing DRM-locked cartridges, so I picked it up and took it with me. After getting situated I started some online research and I figure this brand of printers was manufactured from about 2008-2012, and my printer has a 2012 date.

As it turns out, this tossed printer works perfectly fine. I plugged it into power and ran a test sheet, and it prints almost perfectly. I plugged it via USB-B into my PC running Fedora 41 and immediately it gets picked up and added as usable printer. I then plugged the printer into its Ethernet port and fortunately this thing is new enough to have Bonjour (i.e. mdns) services so once again my PC just immediately finds it and can print. Awesome!

My laptop is a MacBook. While it did detect the pri

New in Linux 6.15:

https://kernelnewbies.org/Linux_6.15

https://lwn.net/Articles/1015414/

https://lwn.net/Articles/1016119/

I want to have a dual-boot laptop where half is Windows and half is Debian. If i encrypt Debian during installation, will it break Windows? I just want to be safe. Thanks in advance

I have copied a DVD of an old family video to my computer but am having trouble playing or converting all of the video content.

If I open the DVD directory in VLC or MPV to play it I can see that the video is 1h46m but it will only play the first 14m53s, which seems to correspond with a 'chapter'. If I open the directory in Handbrake it will detect the full video length of 1h46m and a total of 8 chapters but will only convert the first chapter. Ffmpeg will convert the three main .VOB files to .mkv but the output files only add up to 30m or so of video, which is an improvement over opening the DVD directory in a media player or converting it using Handbrake but still doesn't pick up the full video length.

What, if anything, can I do?

Thanks

I'm on Bazzite Linux 42 and was having some trouble with my 2.4GHz wireless keyboard disconnecting, so I decided to replace it. The new one is having similar issues despite being a different brand (new: XVX, old: Royal Kludge), so I suspect the culprit may actually have been software all along. I have a 2.4GHz wireless mouse connected to the same system that is generally reliable, so I don't believe it's an issue of 2.4GHz interference. The keyboards work well when connected to my Mac, so I don't believe it's faulty hardware.

This keyboard has one feature that may be helpful in troubleshooting: it flashes an LED when it’s trying to reconnect. (The previous one had no indicator.) I can clearly see that, after the keyboard has been idle for a bit, it starts trying to reconnect again. I suspected a power management issue, but I believe I’ve disabled that. I started with a rule in /etc/udev/rules.d/:

 undefined

    
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="1038", ATTR{idProduct}=="1830",